Bext Radio Transmitters

  • Solid State                   

    FB 10000                

  • Totally modular, composed of two FB 5000 amplifiers
  • State of the art combiner system
  • Very high efficiency PA, typically capable of more than rated output power with relatively low input
  • Automatic gain control providing fixed output power even in case of fluctuating AC power
  • Modular architecture offers unsurpassed flexibility and redundancy
  • High reliability, consistent and stable performance due to total absence of tuned elements
  • VSWR, excessive temperature, excessive current and excessive drive power protection, with indicator lights
  • Compact size with built-in high-efficiency switching power supply, providing easy acces and an overload reset system with indicator lights
  • Proportional Auto-Foldback of output power in the event of excessive VSWR
  • Remote control and telemetry capability, with all main parameters on rear contacts
  • Can be locally or remote controlled by PC whithout proprietary software
  • Meets or exceeds all FCC & CCIR requirements
 
(For audio specifications or other features please see Exciter pages, FLX Series Transmitters normally shipped with Lex Series Exciters. Other Bext Exciters available upon request)
Specifications  
Frequency Range: 87.5 - 108 MHz (Other frequencies on request)
RF Output Power: 10000 W
RF Output connector/Impedance: 1 5/8" EIA flange / 50 Ohm
RFinput connector/Impedance: Type 'N' female / 50 Ohm into amplifier system
Spurious & harmonic suppression: Meets or exceeds all FCC  and CCIR requirements
AC voltage requirement : 208~240V, 50/60 Hz, single or three phase. Please specify with order. (Other available upon request)
AC Power consumption: Approx. 15500 VA
RF Drive required : Approx. 245 W
Cabinet Dimensions: Standard 22 ¾” W x 33½” H x 34½” D / Crated, 37” W x 45” H x 27” D 
Approximate Weight: Unpacked 375 lbs (170 Kg);  Crated for shipping, 455 lbs (207 Kg)
Operating Temperature Range 0° C to 45° C (32° F to 113° F) with maximum humidity 90%, non-condensing

(c) 2010 BEXT Corporation USA