SF-xxx Series Remote Monitor Connector

(Units with AC power switch on rear panel)

db25

  1. Reference Voltage 2V
  2. Input Level 2V Full Scale
  3. Current 2V Full Scale
  4. Forward Power 2V Full Scale
  5. Reflected Power 2V Full Scale
  6. Voltage 2V Full Scale
  7. +5V, 50 mA max. (Not Protected)
  8. Temperature 2V Full Scale
  9. LED Lock (10 mA max. to ground)
  10. SCL (Do Not Use)
  11. A.P.C. (Optocoupler Emitter)
  12. Stand-by ON
  13. Stand-by OFF
  14. +12V (Test Point Only)
  15. -12V (Test Point Only)
    1. LED Input Level (2 mA max. Open Collector to +5V
    2. LED Refl. Pwr. (2 mA max. Open Collector to +5V
    3. LED Current (2 mA max. Open Collector to +5V
  16. Ground
    1. LED Voltage (2 mA max. Open Collector to +5V
    2. LED Temperature (2 mA max. Open Collector to +5V
  17. Reset (+5V Pulse to Reset)
  18. SDA (Do Not Use)
  19. A.P.C. (Optocoupler Collector)
  20. Stand-by Common

Notes:
A momentary closure between Pins 13 and 25 removes unit from stand-by and turns POWER ON.
A momentary closure between Pins 12 and 25 places unit in STANDBY.
9/95